milling machines

BS EN 13128
view gallerybuy online

milling machines ā€“ BS EN 13128

The basics:

  1. fixed and interlocked moveable cutter guard or fixed and interlocked moveable table guard
  2. feed and lead screws covered where appropriate
  3. emergency stop
  4. gear drive cover (fixed or interlocked)

CNC milling machines centres ā€“ BS EN 13128

The basics:

  1. full enclosure with interlocked point of operation access
    (Additional access points for maintenance and infrequent access may be fixed so a tool is required to remove).
  2. provision for set-up mode with hold to run or two hand control with reduced speed movement
  3. exhaust extraction(if risk assessment demands it ā€“ depends on levels of cutting oil/coolant mist generated)
  4. strong, properly-maintained vision panels capable of withstanding foreseeable ejections
  5. emergency stop

universal machine guard TOP-630/780

Universal machine guard TOP line – forĀ vertical/horizontal combination milling machines, boring machines, grinding machines and large lathes.

The TOP line machine guard has a flexible, mobile shaft that can be moved both vertically and horizontally. Due to this incomparable mobility, this type of guard can beĀ easily moved to the required location. The TOP machine guard is supplied with a working light.

Optional:

  • Ā microswitch on request
  • column for floor fixing (adjustable height: 1200 mm to 1600 mm)

Weight: approx. 20 Kg.

safety devices for milling machines FB

Arm without balancing, supplied with two safety microswitches. Available with or without lamp (20 W) and right or left fixing.

Weight: approx. 11 Kg.

safety devices for milling machines FT

Safeguards for milling machines to be fitted to the machine table, with microswitch. Easy and quick application to protect the operator against chip projection. Machine start is prevented when the safeguard is open. Supplied with a double-protection wall made of polycarbonate, adjustable in height.

Weight: approx. 18 Kg.

safety devices for milling machines FT/M

Safeguards for milling machines to be fitted to the machine table, with cut out for a table-mounted clamping vice, with microswitch. Easy and quick application to protect the operator against chip projection. Machine start is prevented when the safeguard is open. Supplied with a double-protection wall made of polycarbonate, adjustable in height.

Weight: approx. 18 Kg.

safety devices for milling machines TA

Safeguard for bed-type milling machine to be fitted to the machine table,Ā with microswitch. Steel frame with shockproof transparent screens.

Dimensions: length and width on request, height 300-400-500 mm.

Weight: approx 30 Kg.

safety devices for milling machines BBF

Safeguard for milling machines with three safety microswitches, mounted on articulated arm, balanced and supported on gas spring. The screen is made of steel and polycarbonate or laminated glass.

Available with or without lamp (20W) and right or left fixing.

Weight: approx. 15 Kg.

Safety devices for milling machines AF

Fully-adjustable arm (all directions), supplied with two safety microswitches. The screen is made of steel and polycarbonate or laminated glass. Available with or without lamp (20 W) and right or left fixing.

Weight: approx. 14 Kg.

Safety devices for milling machines BAF

Safeguard for milling machines with three safety microswitches, mounted on articulated arm. With steel tube articulation, balanced and supported on gas spring. The screen is made of steel and polycarbonate or laminated glass. Available with or without lamp (20 W) and right or left fixing.

Weight: approx. 15 Kg.

safety devices for milling machines FAB

Safeguard for milling machines with three safety microswitches. Fitted to an articulated arm, with articulation of chrome-plated steel tube, balanced and kept in position by gas spring. Available with or without lamp (20 W) and right or left fixing.

Weight: approx. 11 Kg.

Safety devices for milling machines FA

Fully-adjustable arm (all directions), supplied with two safety microswitches. Available with or without lamp (20 W) and right or left fixing.

Weight: approx. 11 Kg.

safety devices for milling machines FBB

Safeguards for milling machines with three safety microswitches. Fitted to an articulated arm, balanced and kept in position by gas spring. With chrome-plated steel tubeĀ and polycarbonate hood. Available with or without lamp (20 W) and right or left fixing.

Weight: approx. 11 Kg.

safety devices for milling machines FV

Integral safety enclosure, sliding vertically, for milling machines. Made of pipe structure and polycarbonate screens. Side panels slide and can be positioned. Complete with microswitch system which stops the machine when safeguards are open.

Available in sizes from 70mm to 2000mm.

Weight: approx. 40 Kg.

safety devices for milling machines FR

Tiltable safeguards for horizontal milling machines.

Made of transparent material, complete with microswitch, supplied as a pair and fitted to both sides of the cutting area.

Easily fitted.